HS60 V2/3 Information

HS60 V2/3 – Welcome to your HS60!

Produced by Mechboards.co.uk – Designed by Yiancar

Comes with a preset layout:
GitHub Page

Change layout using VIA Configurator (GUI) –
VIA Configurator
Find the latest VIA.Configurator .exe or .dmg

Also flashable using QMK


To Reset:
Hold Escape
Plug In
Release Escape

To Flash:
Hold Escape
Plug In
Flash using QMK Toolbox

If using a metal case, you may have a shorting issue due to the metal standoffs. Use tape to cover the standoffs which should help.

Files for both V2/V3 are below. (V3 files work on V2)

HHKB .bin file

ISO .bin file

ANSI .bin file

Fn + Backspace – Delete
Fn + WASD – Arrows
Fn + F,G,H,J – Saturation
Fn + Z or X – Effects
Fn + C,V,B,N – Hue
Fn + M or > – Brightness
Fn + > or ? – Effect Speed
Fn + Ctrl, Win, Alt – Audio Settings

Fn + Backspace – Delete
Fn + [;’/ – Arrows
Fn + X,C,V,B – Saturation
Fn + Q or W – Effects
Fn + E,R,T,Y – Hue
Fn + U or I – Brightness
Fn + O or P – Effect Speed
Fn + A,S,D – Audio Settings
Fn + K – Home
Fn + M – End

HS60 V1 Information

HS60 V1 – Welcome to your HS60!

Produced by Mechboards.co.uk – Designed by Yiancar

Exclusive Hotswappable SMD RGB LED 60% Keyboard in ANSI or ISO. Supports QMK.
Uses RGB code developed by Wilba for the Zeal60.

The PCB is fully complete, using SMD RGB LED’s, and Kailh Hotswap Sockets. Just plug in, switch up, and you’re off!

QMK Link – https://github.com/qmk/qmk_firmware/tree/master/keyboards/hs60

Discord Help Link – https://discord.gg/pSUHeJ6

To reprogram, follow this link – https://www.youtube.com/watch?v=7RH-1pAbjvw


to enter the bootloader (flashing mode)
Use the button on the bottom of the pcb, or with the standard keymap the reset keycode which is fn+]


If the PCB behaves abnormally or crashes/flushes at random points:
Fix 1: Try a shorter cable
Fix 2: Lower Brigthness of RGB’s.

To Reset:
Hold Escape & Space
Plug in
Release Escape & Space


Standard ANSI Layout