Additional information
| Weight | 0.5 kg |
|---|---|
| Dimensions | 30 × 10 × 2 cm |
Discipline Kit (V1)
£65.00
DISCIPLINE is a 65%, QMK-compatible keyboard kit that can be entirely assembled with only through hole components, including USB Type-C. Comes with the Bottom PCB plate, PCB, all the components(Controller, diodes, crystal, etc) , and acrylic cover (with screws and standoffs)
ANSI ONLY – ISO version is available from CFTKB only. THIS IS THE V1 Version. Does NOT come with a switch plate or foam. 5-pin switches are HIGHLY recommended.
The Atmega328A is preflashed with a bootloader. Keymap files on QMK.
35 in stock
1 review for Discipline Kit (V1)
Only logged in customers who have purchased this product may leave a review.
casey.paras (verified owner) –
Impressive! Really great kit for any starters out there looking for a PCB mounted board. All the components are through-hole, and you can easily build with the manufacture directions online. Be aware, that guide is for their V2 board, and you’re going to have to improvise for some steps. There’s extra diodes, standoffs, and other hardware just in case you would have a defective/broken part.
One thing that I forgot, again for the starters, is that flux paste should be used when soldering the USB-C connector on the board. The through-hole is SUPER tiny (of course), and I was able to solder this without flux, but it would be much easier if I had it.
Besides that, this is a STEAL, and I’m super happy with my purchase!